Salutron HardyTest HARTIP 1800, Operation Manual

Page: 12 / 40

10
6.3. Power on the instrument
This tester has the function of auto power on while taking measurement and auto power
off after approx one minute of non-use.
To switch on the tester, push the loading tube toward tester until locking the impact body
inside the probe. Then let the loading tube back to original position. The instrument will
be powered on. The screen will show manufacturer’s logo for one second and then enter
the measuring mode, you can start measurement. At this moment, all parameters will be
performed by factory default (new tester) or by last setting up before closed.
Figure 6-3 Measuring mode
If parameters have been set, begin measurement at once. If changing parameters is
required, press the confirmation button
►
on the keyboard to enter main menu.
Figure 6-4 Main Menu
After entering main menu, press
▼
or
▲
button to move among the different options,
press
►
button to enter/confirm this option. Once the parameters setup is finished, they
will be stored.
6.4. Parameters setup
All parameters can be selected or changed from the menu system by operator. By
pressing the three buttons (
▼
,
▲
,
►
) on the face of tester, you can easily change the
necessary parameters and activate the required functions by the logical, friendly menu
system; even you do not need to read the instruction.
Figure 6-5 Parameters Menu
6.4.1. Function of button
▼ ：
Downward button:

Move cursor downward or horizontal.

In measuring mode, shift single or duplex display mode or start to print a new page
while Bluetooth printing is on.
 Delete current reading after set up statistics.
▲ ：
Upward button:

Move cursor upward.