SUN_IS_ electrical_installation_v5.1_06092021
13
2.
Drill one phi 5 mm hole on each side at a 45-degree angle. Then widen it with
a phi 10 drill bit.
NOTE:
The hole must be drilled precisely at a height of 44 cm from the bench seat and 14 cm
from the edge of the door opening (it will be covered by the bench backrest).
3.
Insert wire "4" in the left hole, wire "7" in the right hole, and end both with a loop.
Summary of Contents for SunCube
Page 1: ...OWNER S MANUAL Salus SunCube Sauna...
Page 2: ......
