After entering the settings in
Programmes 1 to 3 for Monday, the
SP120 display will change to
display a COPY TO screen. On this
screen, scroll to the day that you
want to copy the settings to using
the Touch Ring, and then confirm
this by pressing the OK key. The
SP120 will then move to the next
day and ask if you would like to
copy again.
In the example here, Monday has been
programmed, and the next day that has
not been programmed is Tuesday. Once
the settings for Tuesday have been
programmed by copying, the settings
can then be copied to Wednesday, and
so on.
In this example, Thursday is the next
day that has not been programmed and
copied, so the display would look like
this:
Pressing the Arrow key at any time will return the SP120 to the previous screen. Once all the days
have been programmed, the SP120 will revert to NORMAL mode.
Please be aware that each of the programme time settings must be in sequence:
For example,
Programme 3 cannot be set with a time earlier than Programme 2. If this situation occurs, then the
SP120 may operate in an unpredictable way. The controller will return to NORMAL mode after 10
seconds if no Key is pressed or if no movement is detected on the Touch Ring. In this case, the
Programmes will not be updated
11
SP120 INSTRUCTION MANUAL
SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 11
