After confirming the year setting by pressing the OK key, the display will then change to display the
first screen for entering the holiday end date (‘E_DAY’, ‘E_MONTH’ and ‘E_YEAR’)
Use the Touch Ring to enter the date in exactly the same way as for the holiday start date. By default,
the HOLIDAY mode start and end dates are set to the current date.
Make sure that the end date is after the start date
– if not, the HOLIDAY
mode will be disabled. Once HOLIDAY mode is enabled and active, the
display will look like this:
CANCELLING HOLIDAY MODE
When in HOLIDAY
mode, pressing OK
will display CANCEL
HOLIDAY alternately
as shown below:
Pressing the OK key again will cancel HOLIDAY mode and return the SP120 to AUTO mode. Pressing
the Arrow key leaves the controller in HOLIDAY mode.
SP120 INSTRUCTION MANUAL
14
SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 14
