STB8827
Series Operation Manual Chapter 7 Command Reference
Where,
<value> NR1, NR2 or NR3 data format followed by Hz, kHz, MHz.
MIN Set the measurement frequency as 20Hz.
83
MAX Set the measurement frequency as 300kHz (The maximum frequency
of
STB8827
A is 300kHz, the maximum frequency of
STB8827
B
is
500kHz, the maximum frequency of
STB8827
C is 1MHz)
For example: WrtCmd(“FREQ 1KHZ”) Set the frequency as 1000Hz.
Query syntax: FREQuency?
Return format: <NR3><NL^END>
7.1.3 VOLTage subsystem commands
The VOLTage subsystem commands are mainly used to set the measurement
voltage. The VOLTage? query returns the current measurement voltage.
Command syntax:
<value>
VOLTage MIN
MAX
Where,
<value> NR1, NR2 or NR3 data format followed by V.
MIN Set the measurement voltage as 5mV.
MAX Set the measurement voltage as 2V.
For example: WrtCmd(“VOLT 1V”) Set the measurement voltage as 1V.
Query syntax: VOLTage?
Return format: <NR3><NL^END>
7.1.4 CURRent subsystem commands
The CURRent subsystem commands are mainly used to set the measurement
current. The CURRent? query returns the current measurement current.
Command syntax:
<value>
CURRent MIN
MAX
Where,
<value> NR1, NR2 or NR3 data format followed by MA.
MIN Set the measurement current as 50
μ
A.
MAX Set the measurement current as 20mA.
