SALUDA MEDICAL Evoke SCS System User Manual Download Page 3

Page: 3 / 53

Evoke

SCS System User Manual

The Evoke Accessory Belt .............................................................................................32

9.1

Wearing the eCLS with the Accessory Belt ................................................................... 32

9.2

Wearing the Charger Coil with the Accessory Belt ....................................................... 33

10 Maintenance of EPC, Charger and eCLS.........................................................................34

11 Disposal of devices.......................................................................................................34

12 Patient ID Card.............................................................................................................34

13 Troubleshooting...........................................................................................................35

14 Package contents .........................................................................................................38

15 Technical Specifications................................................................................................38

15.1

Device Specifications .................................................................................................... 38

15.2

Wireless Communication .............................................................................................. 45

15.3

Electromagnetic Interference ....................................................................................... 46

16 Glossary.......................................................................................................................50

17 Symbols .......................................................................................................................51

18 Contact us....................................................................................................................53

Trademarks

Saluda, Evoke, and the Saluda Medical logo are registered trademarks of Saluda Medical Pty
Ltd.

Manuals are accessible at:

http://www.saludamedical.com/manuals

CLIN-UMAN-005176

Revision: 4.01

Page 3 of 53

Summary of Contents for Evoke SCS System






















































Search results

Summary of Contents for Evoke SCS System

Reviews:

Brands by name

Popular brands

SALUDA MEDICAL Evoke SCS System, User Manual

Search results

Summary of Contents for Evoke SCS System

Reviews:

Brands by name

Popular brands