SALUDA MEDICAL Evoke SCS System User Manual Download Page 28

Page: 28 / 53

Evoke

SCS System User Manual

Charging Link indicator

The

‘

Charging Link

’

indicator shows the quality of the link

between the Charger coil and the CLS.

No charging

Marginal

Acceptable

Ideal

possible.

alignment.

alignment for alignment for

Charging

charging.

Charger will

possible but

beep every

Charger will

second.

may take

beep once if

longer.

the coil

alignment

falls below

this quality.

Note:

To improve the quality of the link between the Charger coil

and the Evoke CLS, move the coil closer to the implant.

Charger Battery Level indicator

The

‘

Charger Battery Level

’

indicator shows the battery level in

the Charger.

Caution:

As the Charger provides

the charge for recharging the CLS
battery, it is important to start the
charging session with a full Charger
battery.
If the charge falls to one bar, recharge
the Charger.

Note:

Always recharge the Charger at the end of each CLS

charging session to ensure you start the next charging session
with a full Charger.

CLIN-UMAN-005176

Revision: 4.01

Page 28 of 53

Summary of Contents for Evoke SCS System






















































Search results

Summary of Contents for Evoke SCS System

Reviews:

Brands by name

Popular brands

SALUDA MEDICAL Evoke SCS System, User Manual

Search results

Summary of Contents for Evoke SCS System

Reviews:

Brands by name

Popular brands