ESDB-GUIDE-ENG- 02-21
www.saltosystems.com
SALTO Systems - Universal Energy Saver manual
31
CONFIDENTIAL - This document contains confidential and privileged information.
The reproduction of any part of the document is strictly prohibited without the prior written consent of SALTO Systems S.L.
Repeat this process with all the Detectors that will be used in the room and be
synchronized to the same Energy Saver.
Please note that if there is more than one Synchronization Card in the same
installation, ensure that you only use one card for each room to avoid Detectors
being synchronized to Energy Savers located in other rooms.
3.
Fix the Magnet (using screws or stickers) at the indicated point and attached
the Magnet cap to the base.
4. Once the Detector is synchronized correctly to the Energy Saver, complete
the installation of the Door/Window Detector by removing the battery, waiting
approximately 3 seconds, and installing the battiers once again.
5. In the next 40 seconds fix the Detector to its base in such a way that the
arrows on both the Magnet and the Detector line up. It is very important that
the arrows are correctly aligned for proper functioning.
Alignment
arrows
LED on
Proper operation
LED off
Malfunction
