ESDB-GUIDE-ENG- 02-21
www.saltosystems.com
SALTO Systems - Universal Energy Saver manual
16
CONFIDENTIAL - This document contains confidential and privileged information.
The reproduction of any part of the document is strictly prohibited without the prior written consent of SALTO Systems S.L.
2.3 Desynchronization of detectors
Sensors are desynchronised when the sensor delete card is presented to the energy
saver. The energy saver deletes the list of all synchronised sensors.
Desynchronisation is necessary in the following cases:
- When one of the sensors has to be removed from the room.
- When a sensor fails and needs to be replaced.
The room sensors must always be resynchronised with the energy saver after desyn-
chronising.
Desynchronisation is NOT necessary in the following cases:
• When changing the sensor batteries.
• When adding a new sensor to the room.
3. MAINTENANCE AND CLEANING
To keep your device functioning properly, ensure that the optic is clean and nothing is
glued or fixed to it.
Batteries should be replaced approximately every 2 years or sooner if the detector light
starts blinking red.
3.1 Battery replacement
When the battery needs to be changed, the Motion Detector LED will flash red three
times every eight seconds.
