
ChatFusion User’s Guide
283
Check the device Bluetooth setting
Option #1:
Go the Android home page and swipe down from the top
of the screen. On some devices, you may need to swipe down twice.
The Bluetooth icon shows that Bluetooth is turned off
. Tap the
icon to turn Bluetooth on
.
Option #2:
Open the Android
Settings
and select
Bluetooth
in the
left pane. The setting in the right pane shows Off. Tap the setting to
change it to On.
Option #3:
Press and hold the power button and tap
Airplane mode
.
This takes the device out of Airplane mode and turns Bluetooth on.
Can’t find the Library menu
If the Library menu is not displayed, exit Edit Mode.
Resetting the device
Try a soft reset by cycling power with the device’s power button. A
hard reset
is
not
recommended.
No Speech
Check the volume control on the edge of device. If that is not the
problem, choose
Menu
>
Settings > Speech Output
and make sure
Speech Off is not checked.
No speech and messages are not going to the Speech Display Bar
This can be caused if a dwell time has been added. To check the
timing, choose
Menu
>
Settings
>
Input
>
Timing
and check to see if
an Acceptance or Release time has been set.
No Speech in ChatEditor
When you install ChatEditor, the following message appears:
Speech is currently disabled.
Please connect a NovaChat/ChatFusion device to this computer to enable speech.
Choose
OK
to close the message. To enable speech in ChatEditor,
simply connect a USB cable between your computer and your
device. Test the Editor to verify that speech is working. Then
disconnect the cable.