ChatFusion User’s Guide
152
5.
Set the scan mode to Linear. Choose
Patterns
>
Mode
>
Linear
and
choose
OK
.
6.
Go to your vocabulary and step through each button by pressing the
switch at each, then release the switch when you reach the button
you want to activate.
Using Linear Scan Mode with Two Switches
1.
Connect one switch to port A and the other switch to port B.
2.
Verify that Enable Scanning is selected. Choose
Menu
>
Settings
>
Input
>
Scanning
. A checkmark should appear in the Enable
Scanning checkbox.
3.
Turn Auto Scan off. Choose
Switch Access
and verify that Auto Scan
is not selected. With Auto Scan off, a switch activation is required to
move the scan through each button, one at a time.
4.
Set Activation Delay to
0
(zero). Choose
Scan Timing
>
Activation
Delay
.
Note:
This setup will only work if Activation Delay is set to 0.
5.
Set the scan mode to Linear. Choose
Patterns
>
Mode
>
Linear
and
choose
OK
.
7.
Go to your vocabulary and choose switch A to step and switch B to
make an activation.