Salter PT-323 Owner'S Manual Download Page 9

Page: 9 / 53

OWNER’S MANUAL V.1 ENGLISH

PT-323/N E-LINE ELLIPTICAL

This manual is available at

www.salter.es

SSEMBLE

NSTRUCTIONS

”

TEP

–

Pedal Support Arm Assembly

NOTE:

Refer to the inset drawing

FIG.1

, do not cut off the

tie (A)

between the

Pedal Support Arm Assembly

(11)

and the

Pedal Linkage (12)

until

point d. of STEP 3

b. Attach the rear end of the

Right Pedal Support Arm (11)

on the top of the

Right Rail

Connector (54)

and secure with one

Bolt, Button Head (M10xp1.25x85mm)(99)

, one

Washer (10x28x2.0t)(122)

and one

Nut (M10)(111) NOTE:

Please notice before fully

secure the

bolt (99)

, the

Right Rail Connector (54)

’s accurate assembly direction should

face

backward

as the illustration shows on the left

c. Place and secure the

Right Rail Cap (47)

onto the rear end of the

Right Pedal Support Arm Assembly (11)

with one

Self-Tapping Screw, Flat Head (M4x16mm)(88)

d. Refer to the inset drawing

FIG .1

, cut off the

tie (A)

between the

Right Pedal Support Arm Assembly (11)

and the

Right Pedal Linkage (12)

e. Attach the front end of the

Right Pedal Support Arm Assembly (11)

to the

Right Pivoting Arm (9)

with one

Bolt, Button Head (M8xp1.25x90mm)(98)

and one

Nut (M8)(109) NOTE:

Please be sure that

Bolt (98)

would screw through the

Shaft Sleeve (69)

inside front end of the

Right Pedal Support Arm Assembly (11)

during assembly

Attach the front end of the

Right Pedal Linkage (12)

to the

Right Telescoping Bar (10)

with one

Bolt, Button

Head (M8xp1.25x90mm)(98)

and one

Nut (M8)(109)

NOTE:

Please be sure that

Bolt (98)

would screw

Please be sure that

Bolt

(98)

would screw

through the

Shaft

Sleeve (69)

inside the

front end of the

Right

Pedal Support Arm

Assembly (11)

and

Right Pedal Linkage

(12)

during assembly

Do not cut off the

tie

(A)

between the

Pedal

Support Arm

Assembly (11)

and the

Pedal Linkage (12)

until

point d. of STEP

USE HARDWARE KIT

Summary of Contents for PT-323






















































Search results

Summary of Contents for PT-323

Reviews:

Related manuals for PT-323

Brands by name

Popular brands

Salter PT-323, Owner'S Manual

Search results

Summary of Contents for PT-323

Reviews:

Related manuals for PT-323

Brands by name

Popular brands