OWNER’S MANUAL V.1 ENGLISH
PT-323/N E-LINE ELLIPTICAL
This manual is available at
www.salter.es
13
into
HARDWARE KIT
C
S
TEP
8
–
Console Assembly
a. Follow
FIG.2
to attach the
Console Bottom Cover (28)
to the
Console Upper Cover (27)
and secure with
four
Screws, Pan Head (M5xp0.8x25mm)(90)
b. Place and secure the
Console Assembly (27, 28)
onto the iron plate of the
Upright Post Assembly (4)
using
four
Bolts, Socket Head (M6xp1.0x15mm)(101)
c. Connect the
Front Connection Wire (114)
to the
Rear Connection Wire (115). Be care not to pinch the
wires
d. Connect the
Front Pulse Sensor Wire (120)
to the
Rear Pulse Sensor Wire (121). Be care not to pinch the
wires
S
TEP
9
–
Console Sleeve Assembly
a. Slide the
Right Console Sleeve (30)
into the right side of the
Front
Small Handlebar (5)
b. Slide the
Left Console Sleeve (29)
into the left side of the
Front Small
Handlebar (5)
c. Then attach the
Right Console Sleeve (30)
and the
Left Console
Sleeve (29)
to the
Upright Post Assembly (4).
Bolt the
Console Sleeve
(29, 30)
with four
Screws, Round Head (M5xp0.8x15mm)(91)
NOTE:
Make sure that the
Right Console
Sleeve (30)
and the
Left Console Sleeve (29)
would cover the
Upright Cover
(55, 56)
and the lowest layer of the
Console Bottom Cover (28)
as the
illustration shown on the left side
Summary of Contents for PT-323
Page 1: ...OWNER S MANUAL E LINE ELLIPTICAL PT 323 N ...
Page 53: ...53 ...