USER’S MANUAL V092023 ENGLISH
M-280 AIR BIKE
This manual can be downloaded on
www.salter.es
Attach the Dual Action Handlebars
Attach the Left Dual Action Handlebar.
Slide the left Dual Action Handlebar (D1) onto the pivot axle carefully.
Install the Foot Peg (G) by screwing it on, and tighten it with the wrench as shown.
Attach the End Cap (J1) onto the Foot Peg (G) securely.
IMPORTANT:
Be sure to fit the parts in the same order as the diagrams shown.
Make sure the foot peg is fully tightened with the Allen key.
Install the Fix Plate & Linkage Bar
Connect the left Dual Action Handlebar (D1) and Linkage Bar with Fix Plate (I), Disc Space r (J4), M8x30mm
Screw (J2) and M8 Nylon Locknut (J3) and tighten with 5mm Allen Key & 13/17 Wrench.
Doubly secure the Fix Plate (I) to the Linkage Bar with three M6x15mm Screws (J5) and secure with 4mm
Allen Key.
(You should be able to fit these three screws for better alignment by loosening the front screw assembly and
try again when all four screws are in place, tighten with the Allen key provided).
6
