Salter EK1548, Manual

Page: 4 / 25

4
Always unplug the appliance after use and before any
cleaning or user maintenance.
Always ensure that the appliance has cooled fully after use
before performing any cleaning or maintenance.
Always use the appliance on a stable, heat-resistant surface,
at a height that is comfortable for the user.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an
external timer or separate remote control system, other than
that supplied with this appliance.
This appliance is intended for domestic use only. It should not
be used for commercial purposes.
Caution: Hot surface – do not touch the hot section or
heating components of the appliance.
Warning: Do not touch sharp blades.
Important
1. Check that the base of the soup maker is clean before
each cycle.
2. Always fill the stainless steel jug above the min. fill mark,
whilst making sure not to exceed the max. fill mark.
Exceeding the max. fill mark may activate the overfill
sensor, causing the soup maker to stop working and
preventing the ejection of hot liquid during operation.
3. Never connect the soup maker to the mains power supply
until the required ingredients have been added.
4. Do not operate the soup maker when the stainless steel jug
is empty.
5. Never allow any liquid into the connection on the underside
of the lid. If liquid is accidentally spilled onto the connection,
dry thoroughly with a paper towel before fitting.