Salter EK1548, Manual

Page: 22 / 25

Connection To The Mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are coloured in accordance with the following code:
Blue Neutral (N)
Brown Live (L)
FOR UK USE ONLY - Plug fitting details
(where applicable).
The wire coloured BLUE is the NEUTRAL and
must be connected to the terminal marked
N or coloured BLACK.
The wire coloured BROWN is the LIVE wire
and must be connected to the terminal marked L or coloured RED.
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal ( ).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and
conforming to BS 1362 and be ASTA approved.
If in doubt, consult a qualified electrician who will be pleased to do this for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains
lead and should the fuse need replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this for you.
If you need to remove the plug, DISCONNECT IT FROM THE MAINS, then cut it off the
mains lead and immediately dispose of it safely. Never attempt to reuse the plug or
insert it into a socket outlet as there is a danger of an electric shock.