Salray Works SHARON 360, User Manual

Page: 5 / 69

High Bandwidth NDI
®
PTZ Video Camera
5
Safety Precautions
w
Read all of the safety and operating instructions before using the product.
w
Save these instructions for future reference.
w
Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause
hazards, damage product and void warranty.
w
Do not use this product near water or moisture.
w Do not place or mount this product in or on an unstable or improperly supported location.
w
Improperly installed product may fall, causing serious injury to a child or adult, and damage to the product. Use
only with a mounting device recommended by the manufacturer or sold with the product. To insure proper
mounting, follow the manufacturer's instructions and use only mounting accessories recommended by
manufacturer.
w
This product should be operated only from the type of power source indicated on the marking label.
Precautions
w
Before using, make sure power supply and others are properly connected.
w While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and
then contact your local dealer.
w
Do not disassemble or tamper with parts inside the camera.
w Do not drop or subject the camera to shock and vibration as this can damage camera.
w
Care must be taken when you clean the clear dome cover. Especially, scratch and dust will ruin your quality of
camera.
w Do not install the camera in areas of extreme temperature, which exceed the allowable range.
w
Avoid installing in humid or dusty places.
w
Never expose the camera to rain and water.
w
Avoid installation in a place with radioactivity. It may cause a malfunction of the part.
w
Avoid installation in locations with strong magnetic fields or electrical signals.
w Avoid installing in places where the camera would be subject to strong vibrations.
Precautions for Laser Beam
w
Laser beam can damage CMOS. When shooting a scene where laser beam is involved, do not let the beam
contacts the CMOS directly.