Salray Works SHARON 360, User Manual

Page: 21 / 69

High Bandwidth NDI
®
PTZ Video Camera
21
⑦ Installation Check
l
Before supplying power, make sure that there is no abnormality in wiring.
l
Check the camera ID you want to adjust and then select the correct camera ID on the controller. You can
check the camera ID on the screen or ID setting switch.
l If the controller supports multiple protocols, match them with the protocol set in the camera.
l
Make sure to change the camera protocol and video output format while the power is off.
l
Please refer to how to use the controller if the function related to the controller can’t be operated normally
because the method of using it may be different depending on the controller. This manual is based on PELCO and
VISCA standard protocol controller.
⑧ Power
The rated power of this product is DC 12V/1A. Please check whether the power to use is DC 12V output and
the capacity is more than 1A.
Rated Power Input Voltage Range Current Consumption
DC 12V DC 12V ± 10% Max 1A
w
In case of DC power supply, if the power is applied in the wrong polarity, the product may be
damaged.
Pay particular attention to the polarity of the power supply.
w If DC power connection is too long, the product may not operate due to voltage dip.
Therefore, wire the DC power supply wiring as short as possible.
w We are not responsible for any damage to the equipment caused by improper power connection.