14
SALMSON 04/2014
English
5. Product data
5.1 Type code
5.3 Scope of supply
Each pump is supplied with
• 5 / 10 m connecting cable,
• plug (earthing pin), (for single-phase current)
• built-in non return valve,
• connected float switch (A-version),
• hose connection 1½“,
• pipe connection with outside thread 1½“,
• Installation and operating instructions.
5.2 Technical data
Permissible components of the flow media
Mildly acidic / mildly alkaline,
Chloride content max. 150 mg/l (for 1.4301 / AISI 304),
max. permissible grain size
10 mm
Mains voltage
1 ~ 230 V, ± 10 %, 3 ~ 400 V, ± 10 %
Mains frequency
50 Hz
System of protection
IP 68
Speed
max. 2900 1/min (50 Hz)
max. current consumption
see rating plate
Power input P1
see rating plate
Motor power rating P2
see rating plate
max. flow rate
see rating plate
max. pump lift
see rating plate
Operating mode S1
200 operating hours a year
Operating mode S3 (optimum)
Intermittent service, 25 % (2.5 min mode, 7.5 min break)
recommended operating frequency
20 1/h
max. operating frequency
50 1/h
Nominal width of pipe mount
see rating plate
Temperature range of the flow medium
+3 to 35 °C
max. immersion depth
5 m
Oil filling
ELFOLNA DS 22 or comparable, 410 ml
Example: SBS 2-204-0,45MF,
SBS 2-204-0,9MF
S
Submersible motor pump, waste water
B
Low pressure
S
Semi-open impeller
2
2 poles motor
04
Discharge 1½” (DN40)
0,45
Motor power 0.45 kW
M
Main voltage: 1~230 V, single-phase motor
F
Float switch
