Saipa tiba, Owner'S Manual

Page: 62 / 193

62
Starting engine in flooding
If the engine is not starting due to
flooding with too much gasoline,
do the following steps:
1- Make sure the parking brake
is engaged.
2- Push the clutch and brake
pedals simultaneously and shift
the selector lever in neutral
position.
When starting the engine push
down the clutch pedal.
3- Push and hold all the way
down the accelerator pedal.
4- While pushing all the way
down the accelerator pedal,
start the engine and hold the
ignition switch in the start
position at most for ten seconds.
If the engine starts, release
the switch and the accelerator
pedal quickly to prevent sudden
increase of the engine speed. Starting engine in warm
condition
When the engine is warm and
does not start normally (after
several times, starting without
pushing the accelerator pedal),
do the following steps:
Before starting again, wait for
a minute and ensure that the
parking brake is engaged.
4
OWM069
OWM070
Starting the vehicle
clutch
,
,