SAINT-GOBAIN Norton Clipper BLOCKBUSTER BBM307, Owner'S Manual

Page: 8 / 60

7
OwnersManual-MasonrySaw-BBMSeries-Rev09-2023
1. Before mounting any blade on the saw, the blade should be inspected for any damage which might
have occurred during shipment, handling, or previous use.
2. The blade collars and arbors should be cleaned and examined for damage before mounting the
blade.
3. The blade must be properly fitted over the arbor with the relief side of the collars facing the blade.
4. The blade shaft nut must be tightened securely against the outside blade shaft collar.
5. The blade must be operated within the specified maximum operating speed listed on the blade.
6. Fill the water pan with water.
7. The blade guard must be in place with the nose guard down and locked when the saw is running.
8. The operator should wear safety glasses and any other appropriate safety equipment.
9. When starting the saw, the operator should stand away and to the side of the blade.
10. If for any reason the saw should stall in the cut, remove the material from the blade. Check the
outside blade shaft collar and nut for tightness. Inspect the blade for damage before restarting the
saw. Use caution when resuming a cut. Be certain that the blade is in alignment with the previous
cut.
11. Do not force the blade into the cut by pushing the material into the blade too fast.
SAFETY
PRECAUTIONS