SAINT-GOBAIN Norton Clipper BLOCKBUSTER BBM307, Owner'S Manual

Page: 9 / 60

8
OwnersManual-MasonrySaw-BBMSeries-Rev09-2023
BBM307 Lift Points
BBM158 Lift Points
1. Before mounting any blade on the saw, the blade should be inspected for any damage which
might have occurred during shipment, handling, or previous use.
2. The blade collars and arbors should be cleaned and examined for damage before mounting the
blade.
3. The blade must be properly fitted over the arbor.
4. The blade shaft nut, which is a left-hand thread nut, must be tightened securely against the
outside blade shaft collar.
5. The blade must be operated within the specified maximum operating speed listed on the blade.
6. If wet cutting submerges the water pump in clean water and open the water control valve to
provide adequate coolant (4 to 6 gallons per minute). Insufficient coolant could result in severe
blade breakage or diamond segment separation.
7. The blade guard must be in place with the blade collar guard closed when the saw is running.
8. The operator should wear approved eye, hearing, respiratory, and head protection.
9. When starting the saw, the operator should stand away and to the side of the blade.
Lift Here
Lift Here
SAFETY
PRECAUTIONS