Removing the Fabric Sample
Cut the thread from the top of the machine and ensure the needle is all the way up. If it is not, raise
the needle by grabbing the top of the balance wheel and rotating toward the front of the machine (
A
).
Never rotate the other direction. Use your knee or hand to push the knee lift (
B
) to the right, this will
lift the feet. Remove the fabric sample while holding the knee lift to the right. Cut the thread coming
from below the machine.
Note: If you want to lock the feet in the up position, push the knee lift to the right and pivot lever (
C
)
into the up position. Release the knee lift and the feet will stay up. Actuate knee lift and lower lever
(
C
) to drop the feet.
27
B
A
Fill the oil tray with the oil found in the sewing machine box. Try to keep the oil level between the
highest and lowest markings on the oil pan (
28
).
When it becomes necessary to change the oil, unscrew plug (
D
) to drain oil. Wipe the dirty oil and
the dust from the oil drip pan, replace the plug and add fresh oil. Use any high-quality, clear sewing
machine oil.
Please proceed to the Fabricator Guidebook.
Auto Lubrication
28
Lowest
Highest
D
C
11 |
Sailrite.com
Fabricator
®
Assembly Instructions
| 12
Standard Fabricator
®
Assembly
Standard Fabricator
®
Assembly