5
6.
Subscriber’s number
1 3 7 0 0 0
7.
Accept the number and start calling
#
If 1 and/or 2 are omitted, the default network and CES respectively
are selected. (See
Setting Default CES, page 17)
Making a Manual Call, Example
1.
If the display shows:
a)
- the handset is locked. Follow the instructions on how to unlock it.
b)
- the line is occupied (in this example by a fax). Wait until the line
is free again.
c)
- hook off the handset. The display will show:
- and you will hear a dialling tone.
2.
Enter the total number you want to dial, including Network ID,
CES code and separators if necessary, using the numeric keys.
Left arrow deletes last entered digit. For example, to call the
subscriber who has telephone no. 7013 7000 in Denmark:
3.
Accept the number and start calling by the # key.
4.
The earpiece/speaker will make a dialling tone and the display
will show:
5.
When connection is established, the audio is routed through and
the display shows:
6.
When either party taking part in the conversation hangs up, the
other user will hear a busy tone. Also, the display will indicate
that the call has been ended and that the handset should be
hooked on.
7.
After every call, its duration is shown on the display:
The call duration is also stored in the call log, together with user
name and called telephone number.
Ready
Press a Key
To Activate
Not Ready
Line Busy
By Fax
ENTER
Telephone No
_
Ready
Hook Off And
Enter Number
ENTER
Telephone No
004570137000
_
CALLING
Conversation
CALL
TERMINATED
LOCAL
HOOK-ON
LAST
DURATION
00:02:35
