16
6.
Push # key to enter “Configure” item.
7.
Push # key to enter “Extension” item.
8.
Use arrow up/down key to select the item whose
extension is to be changed.
9.
Push # key to enter selected item.
10. Use arrow up/down key to change the value of the
extension number.
11. Push # key for the change to take effect.
Local Number
For each handset it is possible to specified a local number. The local
number is only used in connection with call groups.
The local number of each handset/phone has not to be unique as in
case of the extension number. The local number indicate what ID the
handset/phone is using as identification to the Inmarsat system when
making a call or responding to a incoming call, provided that the
current local number is member of a enabled call group. If the local
number for a handset/phone is not member of a enabled call group
or the call group is disabled, the extension is used as identification to
the Inmarsat system.
The local number for a PSTN phone (connected to X41 or X42) is
always the same as the extension number and can not be changed.
The local number for a handset can be changed from within the
system menu by following these instructions:
1.
Push SHIFT key to enter shifted functions.
Extension Number
Your Inmarsat B terminal’s handsets, phones, and DISTRESS
buttons have extension numbers. When initiating the system, the
extension number of each handset/phone has to be set.
The extension number of each handset/phone has to be unique
because it represents an address in the system.
The extension number of the DISTRESS button, on the other hand,
indicates a connection to a phone or the telex terminal.
When a DISTRESS call is initiated from a DISTRESS button
connected to a phone, a DISTRESS priority call is (automatically)
sent, and an audio signal is generated on the connected phone,
indicating that the user hooks off and answers the RCC. If, for some
reason, the system cannot find the connected phone, the audio
signal is generated in all handsets/phones, and the first to hook off
gets the line.
When a DISTRESS call is initiated from a DISTRESS button
connected to the telex terminal, a DISTRESS priority call with pre-
entered parameters is sent automatically.
Setting up extension numbers of the current handsets, phones and
DISTRESS buttons is done from within the system menu by
following these instructions:
1.
Push SHIFT key to enter the shifted functions.
2.
Push 8 key to enter function menu.
3.
Use arrow up/down to select “System” menu.
4.
Push # key to enter “System” menu.
5.
Use arrow up/down to select “Configure” item.