9
4.
To specify the time in seconds (0-60) that the call should ring
before it is transferred to the specified handset, select “Delay”. If
the delay is set to 0 seconds, the call is transferred immediately;
there will not even be a ringing tone in the first handset before
the call is transferred to the next.
Security Lock Function
The handset can be protected against unauthorized use by security
lock. Security lock works together with a list of user ID’s and
corresponding pin codes. Security lock requires that the user selects
his user ID from a list, and then keys in his personal pin code, before
the handset can be used to generate a call.
The security lock function ensures that only users recognized by the
system can unlock the handset and make calls through the Inmarsat
system.
Answering incoming calls is not protected by security lock. Further-
more sending a distress priority call can also be done regardless of
the security lock.
It is possible to disable the security function in the setup menu.
User ID List
Every user specified in the system is given a priority value. The
priority value determines what the user is allowed to do in the
system. By default, the user list contains 6 entries with different
priority values. The 6 default users are shown below.
User ID
3ULRULW\YDOXH
683(586(5
&DSWDLQ
&RPPDQGHU
2IILFHU
&UHZ
3DVVHQJHU
The super user has the highest priority in the system and is therefore
not restricted in any action. The super user can edit all other users.
Each facility/function in the handset has a priority value. The priority
value of the facility item and the user’s priority value determine
whether the user has access to the item or not. (See Appendix A)
The user ID is written in the call log so it is possible to identify who
has made which calls.
Disabling Security Lock
By default, the transceiver is set up with security lock enabled, and
with the user entries listed above. The pin codes of the default user
ID’s are included in the documentation. To disable security lock, the
user has to be identified with a priority value of 4 or less (Com-
mander, Captain or super user). To select the item for disabling
security lock from the function menu:
1.
Push SHIFT key to enter the shifted functions.
2.
Push 8 key to enter the function menu.
3.
Push # key to enter the “Setup” menu.
4.
Use arrow up/down to select the “Security” item.
5.
Push # key to enter the “Security” menu.
6.
Push # key again to select “On/Off” item.
7.
Push arrow down to select “Disable Lock” item.
8.
Push # key to enter “Disable Lock” menu.
9.
Use arrow up/down to select the default user of the
system.
10. Push # key to accept security lock disabling.
