Sailor RE2100, Technical Manual

Page: 69 / 186

3 SERVICE RE2100
12.
13. Connect the voltmeter to TP2-3 through diode probe.
14. Select service programme SP-04-5 as described in this manual, section 3.10.1. and check the
voltage on TP2-3 to be above 0.8 Volt.
3.6.3.3 CHECK OF PLL2
The PLL2 consists of two independent VCO’s and is capable of delivering two different signals with the
frequencies 59.26912 MHz and 80.73216 MHz.
1. Turn the RE2100 on.
2. Connect the voltmeter to TP5-3.
3. Connect the counter to TP7-3.
4. Select receiver mode and check the DC-voltage on TP5-3 and the frequency on TP7-3 to be in
accordance with point 5
5.
6. Connect the voltmeter to TP7-3 through diode probe.
7. Check the voltage on TP7-3 to be in accordance with table 8.
8.
9. Connect the voltmeter to TP6-3 through diode probe.
10. Select service programme SP-04-5 as described in this manual, section 3.10.1., and check the
voltage on TP6-3 to be above 0.8 Volt.
PAGE 3-39