Sailor RE2100, Technical Manual

Page: 14 / 186

1 GENERAL INFORMATION RE2100
9331 PAGE 1-6
SEND
ALARM
Transmits the distress signal when pressed together with TEST ALARM.
2182
Selects the distress frequency 2182 kHz.
ALARM
TEST
Acoustic check of the alarm signal generator.
LOAD
DUMMY
DIM
Reduces/increases the display light and switches on/off the display and keyboard panel
illumination.
POWER
AGC
Switch the AGC function on/off.
ADD
SQ
Switches the squelch function on/off.
DEL
MODE
Selects modulation type J3E, R3E, H3E and J3E lower side band. (J3E lower side band is
optional).
SC
Selects the scan programme.
7
Digits from 1 to 9 and 0.
STOP
ENT
Terminates the keying-in sequence, stops the alarm signal, stops the scanning, and stops
the TX tuning.
.
Sets the decimal point for the frequency in kHz.
CH
(Digits 0-99)
ADD
SQ
Adds the RX/TX frequency to the channel number.
CH
(Digits 0-99)
DEL
MODE
Deletes the RX/TX frequency from the channel.
TX
CLARIF
TUNE
Resets the tune memory at the selected frequency and starts a new tune-up
cycle.