Sailor RE2100, Technical Manual

Page: 46 / 186

3 SERVICE RE2100
SSB ATTACK
A = 0.5V/div 20 msecs/div
B = 5V /div.
23. Set the timebase on the oscilloscope to 200 msecs/div.
24. Control that the oscilloscope displays the response shown in figure SSB decay.
SSB DECAY
A = 0.5V/div. 200 msecs/div.
B = 5V /div.
25. Select test programme SP-04-7.
26. Set the timebase on the oscilloscope to 50 msecs/div.
27. Set the signal generator in amplitude modulation mode, modulating LF signal 1.0 kHz and
modulating index M = 0.3.
28. Control that the oscilloscope displays the response shown in figure AM attack and decay.
PAGE 3-16