14
BATTERY PANEL
DISASSEMBLE FOR JUMPER SETTING
1. Remove the 4 crosshead screws from the rear cover.
2. Remover the 4 screws of the two D-sub connectors.
3. Carefully seperate the rear cover from the front.
4. Disconnect the 4 ribboncables from the PCB inside the rear cover.
5. Remover the 5 screws holding the PCB and take out the PCB.
6. Re-connect the 4 ribboncables to the PCB.
7. Perform the jumper settings as described on the next page.
8. Re-assemble the Battery Panel.
INSTALLATION
