Sailor 6248 VHF, Installation Manual

Page: 26 / 104

Installing the VHF radio
2-6 Chapter 2: Installation 98-132904-C
2.2.2 SAILOR 6222 VHF DSC for flush mount
You can mount the VHF radio to a flat surface, e.g. an instrument panel. The flush
mount installation kit is included in the delivery.
1. Find a suitable location for the VHF radio. Check that the space is deep enough to
accommodate the VHF radio and an additional min. 120 mm space for cable entry.
2. Keep free distance to allow free air circulation around the VHF radio and to allow
sufficient space for access to cables, see the drawing on this page.
3. Cut out the hole for the VHF radio where you want to mount it. Use the cutting
template in the installation guide.
4. Mount the 4 square nuts M4 in the cabinet, ensure that they are placed correctly so
it is possible to screw in the M4x45 screws.
Figure 2-5: SAILOR 6222 VHF DSC Dimension for flush mount
Figure 2-6: Cutout for flush mount
Important
The scaling in the above drawing is not 1:1 . Consequently do not attempt to
use a print or copy of this page without checking the dimensions.
Flush mount template
Remove material from shaded area only!
99-132034
89mm
227mm
R2.5mm x 4