Sailor 6248 VHF, Installation Manual

Page: 92 / 104

Cable requirements
B-32 Appendix B: System configurations 98-132904-C
Cable 6
Connection cable for bulkhead mount, 5 m.
Part number: 406209-940
Same pin configuration as cable 5.
Cable 7
2-wire screened cable for NMEA (GPS connection).
Cable 8 (AUX)
Part number: 406208-941
SAILOR 6222
VHF DSC
AUX
connector
LTW 12-pin,
circular male
Signal
designation
Cable
pin
406208-
941
(5 m)
SAILOR
6208
Conn. Box
In from
VHF
SAILOR
6208
Conn. Box
Out of
box
SAILOR
6208
Conn. Box
Out of
box
Signal description
Ships cable
6 twisted
pairs
overall screen
Pin 1 Shield/GND Brown J1-1 J2-1 J3-1 Equipment ground paired with
no. 8
Pin 2 Lo Power Blue J1-2 J2-2 J3-2 Low power forced control.
Active when connected to
ground paired with
no. 3
Pin 3 NMEA+ In White J1-3 J2-3 J3-3 Impedance: 600 Ohm. Max.
2 mA at min. level of 2 V
(61162-2) paired with
no. 2
Pin 4 NMEA- In Green J1-4 J2-4 J3-4 paired with
no. 7
Pin 5 AUX Yellow J1-5 J2-5 J3-5 Open Collector output.
Closing on event predefined
through service
programming
a
paired with
no. 6
Pin 6 DSC Call Grey J1-6 J2-6 J3-6 Open Collector output.
Closing on incoming DSC call
(see footnote) paired with
no. 5
Pin 7 DSC Alarm Pink J1-7 J2-7 J3-7 Open Collector output.
Closing on incoming DSC
alert (see footnote) paired with
no. 4
Pin 8 Battery- Red J1-8 J2-8 J3-8 Battery GND paired with
no. 1
Table B-5: Cable specifications for cable 8 (AUX)