28
CC220R
•
Go to
SETTINGS
/
SECURITY
/
RESTRICTION
.
•
Enter the base code, press
OK
.
•
Select an empty location (dashes) or a prefix to modify, press
OK
.
•
Enter the prefix using the keypad. Press
OK
.
- To activate restriction, select
ACTIVATE
.
- To deactivate restriction, select
DEACTIVATE
. Press
OK
.
9.5.5.
M
ODIFYING THE BASE CODE
•
Go to
SETTINGS
/
SECURITY
/
CHANGE CODE
.
•
Enter the old base code using the keypad, press
OK
•
Enter the new base code using the keypad, press
OK
.
•
Confirm by entering the new base code again, press
OK
.
9.6.
A
DVANCED SETTINGS
/ B
ASE SETTINGS
9.6.1.
S
ET THE BASE TO PAIRING MODE
•
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
REGISTR. MODE
.
•
Your base light then starts to flash red rapidly.
•
Your base will remain in registration mode for about 1 minute.
9.6.2.
R
ESETTING THE BASE
When you reset your base, all the base parameters are reset to their initial values (factory
settings).
•
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
RESET BASE
.
•
Press
Yes
.
•
Enter the base code. Press
OK
.
The “
RE-INIT. IN PROGRESS
message is displayed.
9.6.3.
D
E
-
REGISTERING A HANDSET
•
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
DELETE HANDSET
.
•
Select the handset you wish to unregister, press
OK
.
•
A screen prompts you to confirm the unregistration. Press
Yes
to unregister the
handset.
9.7.
A
DVANCED SETTINGS
/ L
INE SETTINGS
You can also set the base to pairing mode by holding down your base’s
button.
You can save up to four GAP-compatible handsets on your CC220R base.
Before changing the settings of the telephone line, contact your operator to
obtain the parameters for your line.
