Sagem PHONEF@X INTERNET 390-i, User Manual

Page: 44 / 52

37
4. TRANSMISSION REPORT CODES
The result of each transmission is given by the logs (transmission/reception) and by the communications report.
In the case of an incident, one of the codes described below is used:
PHONEFAX COMMUNICATION ERROR CODES
Code 01 - No reply
Call later.
Code 02 - No fax reply, number may be wrong
Check the recipient’s number.
Code 03 - STOP
You pressed STOP during the communication.
Code 04 - Invalid speed-dial number
Check the number.
Code 05 - Document feeder incident during the communication
Document jam or document feeder failure.
Code 07 - The remote terminal or line malfunction
Redial.
Code 08 - The document transmitted may have been badly received
Resend it. Check with the recipient.
Code 0A - Retrieve
You tried to retrieve a document but the remote terminal had no deposited document.
Code 0B - Difference between the number of pages defined for transmission and the number of pages sent
Check the number of pages.
Code 13 - Memory full
Fax reception impossible.
Code 17 - Your machine is in protected access mode
A party tried to call you and did not have your password.
Code 23 - Mailbox unknown, n°
The mailbox number indicated does not exist in the other fax machine.
INTERNET COMMUNICATION ERROR CODES
Codes 40 and 41 - No ISP reply
The modem cannot connect to the Internet service provider. If the error occurs systematically, check the
supplier’s dial-up number.
Code 42 - Cannot connect to Internet service provider
The service provider refuses the connection, the service is temporarily unavailable. If the error occurs
systematically, check the Internet connection parameters.
Code 43 - Cannot connect to the SMTP server
Cannot connect to the SMTP server to send mail, the service is temporarily unavailable. If the error occurs
systematically, check the Internet e-mail and server parameters.
Liasse 23228000-2 A (T).book Page 37 Jeudi, 5. août 1999 9:26 09