Site Technical Documentation - GSM 900/1800 - Serie 3000
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 200229/03/01
Page 3-24
3.4 ERROR MESSAGES DURING START UP
Message
Meaning
Procedure
WARNING
UNTUNED
RADIO
Invalid EEPROM field (SAGEM)
SAGEM factory return
PB IMEI
Consistency problem at IMEI level
SAGEM factory return
SIM MISSING
SIM card missing or badly inserted
Insert the SIM card
IMEI ERROR
Consistency problem at IMEI level
SAGEM factory return
ERRONEOUS NUMBER
Invalid number (after reception of a network error
code)
SAGEM factory return
UNTUNED
Mobile not configured
SAGEM factory return
UNKNOWN BATTERY
Battery not recognised by the mobile
Replace the battery
HARDWARE
FAILURE
MOBILE BLOQUED
Exceeding numbers of capture of unlock SIM
code.
Out of Warranty
SIM BLOCKED
Three bad PIN codes have been input
Contact the operator
SIM LOCKED (with SIM)
SIM card not adapted to the operator
Replace the SIM card
SIM LOCKED (without
SIM)
Attempt of corruption (EEPROM fields)
Out of Warranty
BATTERY TOO LOW
Battery state
Replace the battery
PROTECT SIM
Integrity violation of phone
SAGEM factory return
BEWARE MOBILE
UNREGULATED
Mobile unregulated
SAGEM factory return
3.5 OTHER ERROR MESSAGES
Message
Meaning
"LINE INCIDENT"
Fax & PC link type "Problems"
"FULL MEMORY"
Fax & PC link type "Problems"
"CLEARING REJECTED"
Fax & PC link type "Problems"
"CHECK CONNECTION"
Fax & PC link type "Problems"
"NOT CONSULTED DOCUMENT"
Fax & PC link type "Problems"
"DEVICE PROBLEM"
Fax & PC link type "Problems"
"VERIFY APPLICATION"
Fax & PC link type "Problems"
"BUSY"
"Problems" related to the network and Communications
"K.PAD LOCKED PRESS *V"
Keypad locked
"OPTION NOT AVAILABLE"
Menu not available for this product version
"PROG.KEY NOT VALID"
Input "Problems"
"ERROR!!"
Calculation error with the calculator (division by zero)
"NOT REACHABLE"
Call forwarding if the mobile is not reachable
"NOT AVAIL."
Not available
"SIM LOCKED"
"Problems" related to the SIM card (protected software)
