Proc Sheet 1 06
myX-3 & myX-5
REMOVING / REPLACING THE SIM LOCKER
1/2
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
Page 5-24
4.51
Tools :
- A 0.6mm torx screwdriver
4.52 Preliminary operation :
1. Remove the back cover (
Proc sheet 0 01
).
2. Remove the battery (
Proc sheet 0 02
).
3. Remove the SIM card .
4. Remove the front cover (
Proc sheet 0 03
).
5. Unscrew the six attachment screws on the electronic board .
6. Remove the assembly display
(Proc sheet 1 02)
7. Remove the light guide keypad
(Proc sheet 1 03)
8. Remove the electronic board.(
Proc sheet 1 04
)
4.53 Removal procedure :
1. On the assembly plate (2), lookeed at from the battery side ,press firmly the SIM locker (1) until its
extraction .
2. Remove the SIM cover (1).
4.54 Placement procedure :
1. Place the SIM cover (1) in position in its housing.
2. Click fit the SIM cover (1) on the plate.
4.55 Further operations :
1. Remove the electronic board on the assembly plate.(
Proc sheet 1 04
)
2. Replace the light guide keypad
(Proc sheet 1.03
)
3. Replace the assembly display
(Proc sheet 1 02)
4. Position and tighten the six attachments screws with torque of 0,25 N.m.
5. Replace the front cover /battery / back cover (
Proc sheet 0 01 / 0 02 / 0 03)
.
6. Carry out the radio test (
Test Sheet 06
).
