31
Troubleshooting
SAGEM F@st™ 1400 / 1400W
If access to the configurator is still impossible, you should carry out the following
instructions:
1.
Check that the Ethernet or USB cable is properly connected at both its ends.
2.
In the event of the USB being used, check that the USB Bridge/Router ADSL
peripheral is actually installed on your computer.
3.
Check that your computer is configured in DHCP client.
In Windows
• Click on
Start
and then on
Configuration
tab in
Network Properties
.
• Click on the wireless network card’s
TCP/IP
protocol, then click on
Properties
.
The screen opposite will be displayed.
• Select the General tab, then the
"Obtain an
IP address automatically"
and
"Obtain
DNS server address automatically"
command.
• Click on the
OK
button to validate your
choice.
In Mac
• Click on the
Apple
menu in the menu bar,
select
System Preferences
, then click on
the
Network
icon. The following screen will
be displayed.
• Select the
TCP/IP
tab.
The
Configure
field should display
Using
DHCP
by default.
If this is not the case, select this value by
means of the drop-down list.
