17
Configuring the modem/router
SAGEM F@st™ 1400 / 1400W
The
Connect via:
field should display
ADSL USB Modem xxx
by default. If this is not the
case, select this value using the drop-down list.
The
Configure:
field should display
Using DHCP Server
by default. If this is not the case,
select this value using the drop-down list.
You can now access the modem/router’s HTTP configurator.
Refer to chapter 5 - "Access to the HTTP configurator", page 18.
(5)
4.4
Wiring
• Connect the "square" end of the USB cable (5) to the modem/router (
USB
port).
• Connect the "flat" end of the USB cable (5) to an available port on your computer or your
USB Hub.
