Sagem D20V User Manual Download Page 29

Page: 29 / 44

NSWERING

MACHINE

If you want to change the announcement,

hold down the

key until you hear a

beep.

You will hear the following message:

RECORD YOUR ANNOUNCEMENT
AFTER THE BEEP.

Speak clearly and close to the base to record
your announcement.

At the end of your announcement, press

the

key.

Your announcement is played back
automatically.

Your recording answering machine is now
active. The number of messages is shown on
the display.

If you make a mistake while recording the
announcement, repeat the operations
described above until you are satisfied with
your announcement.

Returning to the pre-recorded
announcement

Press the

key.

Repeatedly press the

key until

"o1"

shown on the base display.

You will hear the following message:

PRESS

OK TO ACTIVATE RECORDING MODE.

Press the

key. The current

announcement is played back.

If you want to return to the pre-recorded

announcement, hold down the

key

until you hear a beep.

STOP

You will hear the following message:

RECORD YOUR ANNOUNCEMENT
MESSAGE AFTER THE BEEP.

Press the

key immediately after the

beep.

The pre-recorded (default) announcement is
now active again.

Creating your personal
announcement for the basic
answering machine

Press the

key.

Repeatedly press the

key until

"o2"

shown on the base display.

Press the

key. The current

announcement is played back.

If you want to change the announcement,

hold down the

key until you hear a

beep.

You will hear the following message:

RECORD YOUR ANNOUNCEMENT
MESSAGE AFTER THE BEEP.

Speak clearly and close to the base to record
your announcement.

At the end of your announcement, press

the

key.

Your announcement is played back
automatically.

Your basic answering machine is now active.
"

oo"

is shown on the display.

STOP

LU 252117222C_D20V_EN.book Page 29 Mercredi, 24. août 2005 11:46 11

Summary of Contents for D20V













































Search results

Summary of Contents for D20V

Reviews:

Related manuals for D20V

Brands by name

Popular brands

Sagem D20V, User Manual

Search results

Summary of Contents for D20V

Reviews:

Related manuals for D20V

Brands by name

Popular brands