8
Y
OUR
TELEPHONE
Handset set-up
Insert the batteries one after the other in
compliance with the battery polarity, as
shown on the label in the telephone set.
Place the cover back on the handset by
pushing upwards until it is completely closed.
Remove the protective film on the screen,
place the handset on the base to fully charge
the batteries.
A beep is transmitted by the handset and the
charging icon appears on the screen, it
indicates the charging status. When icon is
completely shaded (4 bars), your batteries
are charged.
Telephone set turning on and off
To turn off the telephone set, hold down the
C
key. Your telephone set is now switched off. If
you decide to switch off your handset during several days, you must remove the batteries (see
next page for more information about battery assembly/disassembly).
To turn on your telephone set, hold down the
C
key. Information is displayed on the screen.
The battery charging indicator icon, the telephone set number, the name of handset, the time
and the range indicator.
Only use certified rechargeable batteries. For optimal battery charge, leave
the handset on the base for at least 6 hours during initial use. During
charging, the batteries may heat up, this is quite normal and without risk.
To keep your phone in optimised working order, we recommend, while not
giving calls, to replace the handset on the base connected to the mains.
Never put the handset without its batteries on the base.
To avoid damaging batteries when the handset is turned off, do not let them
inside.
LU 252117222C_D20V_EN.book Page 8 Mercredi, 24. août 2005 11:46 11
Summary of Contents for D20V
Page 1: ...User guide LU 252117222C_D20V_EN book Page 1 Mercredi 24 août 2005 11 46 11 ...
Page 42: ... MEMO ...
Page 43: ... MEMO ...