Sagem D20V, User Manual

Page: 23 / 44

23
B
ASE SETTINGS
Modifying the pause duration
If you connect your telephone to a private
automatic branch exchange, you may need
to modify the pause duration in order to use
your telephone correctly. Four
preprogrammed durations are proposed on
the list, the correspondence between the
number of the list and the duration is the
following.
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
Select PAUSE DURA using or . Press
OK .
An information screen presents the current
pause duration.
•
To keep the same time, press C .
• To modify the time, select the new pause
time using or . Press
OK .
To exit the menu, press the red key .
number
corresponding
duration
1 1 second
2 1,5 second
3 2 seconds
4 3 seconds
To enter the pause mode during
dialling, press the key until letter
P appears.
Changing the dialling mode
Your telephone can dial in the pulse or voice
frequency mode.
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
Select DIAL MODE by pressing the or .
key. Press OK .
Select PULSE or TONE by pressing the
or . key. Press OK .
To exit the menu, press the red key .
Modifying the base code
The base code ( 0000 by default setting) is
required to access the following functions:
•
modifying the base code,
• re-initialise the base,
• registering a new handset,
• de-registering a handset.
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
When operating in a network, if you
choose to dial in the pulse mode,
your telephone may not operate.
The dialling mode by default is set to
the voice frequency mode.
Modify the base code only if you
really wish to protect the access to
these functions.
LU 252117222C_D20V_EN.book Page 23 Mercredi, 24. août 2005 11:46 11