Sagem D20V User Manual Download Page 30

Page: 30 / 44

NSWERING

MACHINE

If you make a mistake while recording the
announcement, repeat the operations
described above until you are satisfied with

your announcement or press the

key

during the playback of the announcement.

Returning to the pre-recorded
announcement

Press the

key.

Repeatedly press the

key until

"o2"

shown on the base display.

You will hear the following message:

PRESS

OK TO ACTIVATE ANSWERING ONLY
MODE.

Press the

key. The current

announcement is played back.

If you want to return to the pre-recorded

announcement, hold down the

key

until you hear a beep.

You will hear the following message:

RECORD YOUR ANNOUNCEMENT
MESSAGE AFTER THE BEEP.

Press the

key immediately after the

beep.

The pre-recorded (default) announcement is
now active again.

STOP

Listening to your messages

Press the

key to listen to your

messages

-If you have any new messages, only those
will be played back, from the most recent to
the most ancient one.

-If you do not have any new messages, all
the old messages will be played back, from
the most recent to the most ancient one.

The date and the time the messages were
received are announced before each
message.

Listen again to the current message

Press the

key during the playback of

the message.

Listen again to the previous
message

Press the

key twice to hear the

previous message again.

Go to the next message

During playback of the message, press the

key to skip to the next message.

While listening to the messages, you
can increase the sound level by
pressing the

key. To

decrease the sound level, press
the

key

To play back the new and the old

messages, hold the

key

down for several moments

Vol

LU 252117222C_D20V_EN.book Page 30 Mercredi, 24. août 2005 11:46 11

Summary of Contents for D20V













































Search results

Summary of Contents for D20V

Reviews:

Related manuals for D20V

Brands by name

Popular brands

Sagem D20V, User Manual

Search results

Summary of Contents for D20V

Reviews:

Related manuals for D20V

Brands by name

Popular brands