23
English
Problem: No image appears on screen.
Ensure all the video and/or computer cables and also the power supply cord are correctly
and securely connected as described in the “Installation” section (page 9).
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please refer to the “Changing
the lamp” section (page 26).
Make sure you have removed the lens cap and the projector is switched on.
Problem: Partial, scrolling or incorrectly displayed image.
Press the “R-Sync” button on the Remote Control or the “RESYNC” button on the
control panel located on the projector top cover.
If you are using a PC:
If the resolution of your computer is higher than 1024 x 768. Follow the steps outlined
below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the “Windows Setup” icon in the Main group.
2. Verify that your display resolution setting is less than or equal to 1024 x 768.
For Windows 95:
1. Open “My Computer” icon, the “Control Panel” folder, and then double click the
“Display” icon.
2. Select the “Setting” tab.
3. In the “Desktop Area” you will find the resolution setting. Verify that the resolution
setting is less than or equal to 1024 x 768 resolution.
If the projector is still not projecting the whole image, you will need to also change the
monitor display you are using. Refer to the following steps.
Troubleshooting
If you are experiencing trouble with the projector, refer to the following. If the
problem persists, please contact your local dealer or our service center on the
Internet web site here below.
Appendices