10
English
Powering On the Projector
1. Remove the lens cap.
n
2. Ensure that the power cord and the video and/or computer cable are securely
connected.
3. The “Power/Standby” indicator will flash.
o
And press the “Power/Standby”
button to start on your projector.
The startup screen will display and count down for 20 seconds and the Power/
Standby indicator will light solid amber.
4. Turn on your source (computer, notebook, or video player ,etc.): the projector will
detect your source automatically.
* If the screen displays “No Signal” , please make sure the signal cables are
securely connected.
* If you connect multiple sources at the same time, use the “Source” button
on the Remote Control or Panel Control to switch.
* Turn on the projector display first and then the computer.
Power On/Off the Projector
Lens cap
Power /
Standby
