11
English
Powering Off the Projector
1. Press the “Power/Standby” button to turn off the projector lamp.
2. After pressing the “Power/Standby” button, you will see a message “Power off the
lamp?” on the On-Screen Display. Press the “Power/Standby” button again to confirm.
Otherwise the message will disappear after 5 seconds.
3. “Power/Standby” LED indicator will flash amber for about 30 seconds.
4. Disconnect the power cord from the electrical outlet and the projector.
* When the “LAMP” indicator lights solid orange; please change the lamp module
immediately (see “Changing the lamp” section in page 26).
* When the “TEMP” indicator lights solid orange, it indicates the projector has been
overheated. The display will automatically shut itself down.
Under normal conditions, the display can be switched on again for your presentation. If
the problem persists, you should contact your local dealer or our service center on our
Internet web site here bellow.
* No matter the video source and/or computer is input or not, if you press“Power/
Standby”, a “Power off the lamp ?” sign will display in screen. You can clear the turn-off
message by pressing any function key. Or you can just ignore this message without
pressing any function key; the message will disappear after 5 seconds and restore to
previous status.