![background image](http://html2.mh-extra.com/html/sage/nutri-juicer-bje410/nutri-juicer-bje410_quick-manual_3443382011.webp)
11
EN
TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work
when switched ON
• The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into
the two grooves on either side of the juicer cover.
Motor appears to stall
when juicing
• Wet pulp can build up under the juicer cover if the juicing
action is too vigorous. Try slower juicing action by pushing
the food pusher down more slowly. Follow Disassembling
and Cleaning instructions and clean the filter bowl surround,
the stainless steel filter basket and the juicer cover.
• The juicer will automatically stop operating if the motor is
stalled for more than 10 seconds. Either too much food is
being processed at one time or the pieces are not small
enough. Try trimming the food or cutting into smaller pieces
of even size and processing a smaller amount per batch.
To continue juicing, reset the juicer by pressing the ON / OFF
switch on the control panel back to OFF then turn the
appliance back on by pressing ON / OFF switch to ON.
• Hard fruit and vegetables will put excess strain onto the
motor if a low speed is selected. Please refer to the juicing
guide to determine the correct speed for the fruit and
vegetables selected for juicing. Please ensure the motor is
running prior to loading the chute.
Excess pulp building
up in the stainless steel
filter basket
• Stop the juicing process and follow Disassembling
instructions. Remove the juicer cover, scrape off pulp,
reassemble and begin juicing again. Try alternating
(soft and hard) vegetables and fruit varieties.
Summary of Contents for Nutri Juicer BJE410
