= Inspect
= Verify
= Perform process
Page 28 of 45
Document No: 723590-1
Revision: D
Issue Date: 2023-Jan-30
This document and all copies are the property of Safeworks, LLC. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
9. DAILY TESTING AND INSPECTION
CAUTION:
Perform all daily tests to ensure correct operation!
DO NOT
use the hoist for lifting until
it has successfully completed the daily tests.
The following tests must be performed at the start of each work shift. If the hoist fails any test,
DO NOT USE THE HOIST UNTIL IT IS REPAIRED
. Refer to the pictures on Page 20
through Page 21 to identify components. All tests are performed at or near ground level.
9.1 Inspect after Previous Use
Before operating the hoist, inspect the following:
►
Wire rope
►
Power supply
►
Rigging
►
Platform
►
Hoist
Verify that all parts are present, in proper working order, and are not damaged.
Bolts, nuts, and clamps must be well secured.
Ensure the hoist is secured to the stirrup with SAE Grade 5 fasteners and locknuts that are properly
installed.
When using the hoist in a harsh environment that contains epoxy, paint, cement, sand blast residue, or
corrosive material, inspect the operation of the secondary overspeed brake several times a day. Protective
hoist covers are recommended in these environments. Contact your hoist supplier.
