V2.0 2021 Copyright Safewaze
Page 18
FIGURE 20 HOUSING LABELS
9.0 LABELING
Ø 60mm
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
Ø 60mm
FS-FSP1407-W
FS-FSP1407-W
7’ Single Leg / Steel Snap Hook
1
2
3
4
5
Inspection
Year
MUST FOLLOW ALL MANUFACTURER’S INSTRUCTIONS
INCLUDED WITH THIS EQUIPMENT. DO NOT REMOVE LABEL.
WARNING: User must read and understand all
instructions, provided with this product at time of
shipment, prior to use.
DO NOT ATTEMPT TO SERVICE OR REPAIR THIS
UNIT! CONTACT SAFEWAZE™ FOR SERVICE OR
REPAIR INFORMATION.
USE: This is a single person fall arrester device.
Connection of this device to a full body harness is to
be made to the dorsal D-ring only. User must ensure
that any connection to anchorage is properly secured
prior to use. Avoid lifeline contact with sharp or
abrasive edges. Avoid chemical, thermal and/or
electrical hazards. This product is suitable for use
with horizontal lifelines and horizontal positioning.
Fall clearances must be calculated by a Competent
Person prior to use. Avoid swing fall hazards. Fall
clearance number for this device is based upon unit
installed in an overhead vertical position in-line with
the user. Not to be used for leading edge
applications.
INSPECTION: Device must be inspected prior to
each use. Inspect device per instructions to include
Locking Function Test (sharp pull test), retraction
test, label legibility, any evidence of damage or
defects, or missing components or parts. Inspect
housing, connectors, fasteners and full length of
lifeline component for any damage or defects. This
product must be inspected in accordance with the
manufacturer’s instructions. Unit must be removed
from service if exposed to fall arrest forces. Fall
indicator is sewn into webbing above the snap hook;
immediately remove unit from service if the fall
indicator is visible.
Specifications:
Working length: 7 ft (2.13 m)
Material: Steel hardware; aluminum
housing; 1 in Dyneema® webbing
Capacity range: ANSI, 130-310 lbs (58.96-140.61 kg)
OSHA, up to 420 lbs (190.51 kg)
Average arresting force: 1350 lbs (612.35 kg)
Max arrest force: 1800 lbs (816.47 kg)
Max arresting distance: 24 in (60.96 cm)
Free fall limit: 24 in (60.96 cm)
Class A unit
020065
Ø 59.5mm
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
Ø 60mm
FS-FSP1407-W
FS-FSP1407-W-TBH
7’ Single Leg / Steel Tie-Back Hook
1
2
3
4
5
Inspection
Year
MUST FOLLOW ALL MANUFACTURER’S INSTRUCTIONS
INCLUDED WITH THIS EQUIPMENT. DO NOT REMOVE LABEL.
WARNING: User must read and understand all
instructions, provided with this product at time of
shipment, prior to use.
DO NOT ATTEMPT TO SERVICE OR REPAIR THIS
UNIT! CONTACT SAFEWAZE™ FOR SERVICE OR
REPAIR INFORMATION.
USE: This is a single person fall arrester device.
Connection of this device to a full body harness is to
be made to the dorsal D-ring only. User must ensure
that any connection to anchorage is properly secured
prior to use. Avoid lifeline contact with sharp or
abrasive edges. Avoid chemical, thermal and/or
electrical hazards. This product is suitable for use
with horizontal lifelines and horizontal positioning.
Fall clearances must be calculated by a Competent
Person prior to use. Avoid swing fall hazards. Fall
clearance number for this device is based upon unit
installed in an overhead vertical position in-line with
the user. Not to be used for leading edge
applications.
INSPECTION: Device must be inspected prior to
each use. Inspect device per instructions to include
Locking Function Test (sharp pull test), retraction
test, label legibility, any evidence of damage or
defects, or missing components or parts. Inspect
housing, connectors, fasteners and full length of
lifeline component for any damage or defects. This
product must be inspected in accordance with the
manufacturer’s instructions. Unit must be removed
from service if exposed to fall arrest forces. Fall
indicator is sewn into webbing above the snap hook;
immediately remove unit from service if the fall
indicator is visible.
Specifications:
Working length: 7 ft (2.13 m)
Material: Steel hardware; aluminum
housing; 1 in Dyneema® webbing
Capacity range: ANSI, 130-310 lbs (58.96-140.61 kg)
OSHA, up to 420 lbs (190.51 kg)
Average arresting force: 1350 lbs (612.35 kg)
Max arrest force: 1800 lbs (816.47 kg)
Max arresting distance: 24 in (60.96 cm)
Free fall limit: 24 in (60.96 cm)
Class A unit
020066
