Introduction To The Components
15
Conveyor Table Height
Adjustment Gauges
There are two table height gauges included as
standard equipment on the Safety Speed Cut Wide
Belt Sanders. There is also one optional gauge
available. See Fig. 25. The two standard height
gauges are simple systems. One has a ruler with
an indicator and the other is a simple stationary
pointer. See Figs. 23 & 24. Utilizing the standard
or optional gauges will help you get the most
accurate, consistent and professional results from
your sander. The points listed below address a
description and explanation of the use of each of
the table height gauges on the machine.
Gauge With Ruler And Indicator
This gauge is positioned on the left-hand side
(hand wheel side) of the machine. It is positioned
vertically. There is a red colored indicator which
points to your position on the ruler. This shows
the table height in relationship to the contact
roller. See Fig. 23. It is also used to indicate when
you have reached your desired material thickness.
This gauge is to be used in conjunction with a
material thickness gauge. It is also used in
conjunction with the second standardgauge on the
machine, the stationary pointer.
Ruler Indicator
Figure 23: Gauge with Ruler and Indicator
Stationary Pointer
Figure 24: Stationary Table Height Gauge
Optional Gauge
Figure 25: Optional Table Height Digital Readout
Gauge