background image

Choosing Lower Anchor or 

Vehicle Belts

28

The LATCH System 

The lower anchors of LATCH (Lower Anchors and Tethers for 
CHildren) is a universal system for installing child restraints without 
using vehicle seat belts. 
The lower anchor system can ONLY be used in vehicles that have 
the lower anchor bars installed in designated LATCH seating 
positions. Most vehicles manufactured after September 2002 
are equipped with lower anchor bars. Check your vehicle owner’s 
manual to see which seating positions may be equipped with the 
LATCH system. 

When installing with vehicle belts, the lower anchor hooks 
and belt MUST be properly stored.

To store the lower anchor belt on this child restraint: 

Thread 

lower anchor belt through forward-facing belt path. Then attach 
hooks to attachments behind pad as shown. Gently pull free end of 
belt to remove slack. 

Vehicle Belts 

If lower anchors are not an option or if your child weighs more 
than 40 lb (18 kg), you must use the vehicle seat belt system to 
install the child restraint. 

There are some vehicle belts that will not work with a child 
restraint or will require special attention. Check your vehicle 
owner’s manual for specific instructions.

Lower Anchor Bars

Vehicle Seat Bight

Lower Anchor 

Hooks

Adjuster

Lower Anchor Belt Storage

WARNINGS: 

When used correctly the lower anchor belt 

or vehicle belts are equally safe. Do not use both the lower 
anchor belt and vehicle belt at the same time.

27

Your vehicle’s features may be considerably different than 

those pictured here. 

Your vehicle’s features may be considerably different than 

those pictured here. 

Summary of Contents for Guide 65



































Reviews: